ENGEV341-23B (HAM)

Environmental Engineering 2

15 Points

Edit Header Content
The University of Waikato
Academic Divisions
Division of Health Engineering Computing & Science
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Lecturer(s)

Administrator(s)

: janine.williams@waikato.ac.nz

Placement/WIL Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: anne.ferrier-watson@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
    • For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Edit Staff Content

What this paper is about

Edit What this paper is about Content

This paper covers the design, operation and management of unit processes used in environmental engineering including air, pollution water, wastewater, stormwater, solid waste, contaminated land, noise, treatment and control.

The learning outcomes for this paper are linked to Washington Accord graduate attributes WA1­-WA11. Explanation of the graduate attributes can be found at: https://www.ieagreements.org/ (https://www.ieagreements.org/)

Edit What this paper is about Content

How this paper will be taught

Edit How this paper will be taught Content

The course will be taught using a combination of lectures, tutorials, reading, laboratory and field work .

Important Note for International Students: For international students in New Zealand under student visas, regular attendance is part of your visa obligation and is checked as a requirement on the University under the Code of Practice for the Pastoral Care of International Students, to which the University is a signatory. Academic staff are formally required to monitor attendance in classes and submission of compulsory assessment events/items and to report to Waikato International in the event that any problem with irregular attendance or non-submission is not resolved.

Edit How this paper will be taught Content

Required Readings

Edit Required Readings Content
"Introduction to Environmental Engineering" by Cornwell and Davis, 5th Edition, McGraw-Hill.
Edit Required Readings Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the course should be able to:

  • Design and size air discharge treatment unit processes including cyclones, filter bags, electrostatic precipitators, ammonia and sulfur scrubbers (WA1,3)
    Linked to the following assessments:
  • Design and size solid waste/sludge unit treatment processes including incineration, digestion, pyrolysis (WA1, 3)
    Linked to the following assessments:
  • Design and size wastewater treatment unit processes including screening, grit removal, primary settlement, secondary biological treatment, tertiary treatment (WA1, 3)
    Linked to the following assessments:
  • Design and size water treatment unit processes including inlet works, coagulation, flocculation, sedimentation, filtration, disinfection (WA1, 3)
    Linked to the following assessments:
  • Undertake contaminated soil remediation design (WA1, 3)
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessments

Edit Assessments Content

How you will be assessed

Edit How you will be assessed Content
Samples of your work may be required as part of the Engineering New Zealand accreditation process for BE(Hons) degrees. Any samples taken will have the student name and ID redacted. If you do not want samples of your work collected then please email the engineering administrator, Natalie Shaw (natalie.shaw@waikato.ac.nz), to opt out.
Edit How you will be assessed Content

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50. There is no final exam. The final exam makes up 50% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50 or 0:0, whichever is more favourable for the student. The final exam makes up either 50% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Test 1
18 Aug 2023
3:00 PM
10
  • In Class: In Lecture
2. Test 2
13 Oct 2023
3:00 PM
10
  • In Class: In Lecture
3. Lab and field trip reports (4 and 4)
30
  • Online: Submit through Moodle
4. Exam
50
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content